Trumpeter 1/32 North-American F-100C Super Sabre # 03221

North-American F-100C Super Sabre - Plastic Model Aircraft Kit

Trumpeter 1/32 North-American F-100C Super Sabre # 03221

The F-100C model first flew in March 1954 and 456 of this fighter/bomber aircraft were produced.The C model was fitted with additional fuel tanks in the wings, external store pylons under the wings so it could carry 6,000 pounds of bombs and additional external fuel tanks.Later production aircraft used the upgraded J57-P-21 engine.

An air refueling capability was also added to the C models. The air refueling probe initially extended straight forward of the leading edge of the right wing. The aircraft was flown behind a tanker aircraft with a long refueling hose and basket.The pilot moved forward,plugged the probe into the basket and maintained forward pressure during the fuel transfer. This straight probe was difficult to use and was later reconfigured with an upward bend to raise the height and extend the end of the probe.

The United States Air Force Thunderbirds performed in the F-100C from 1956 until 1964.

Engine: One Pratt & Whitney J57-P-21/21A turbojet, 10,200 lb.st. dry and 16,000 lb.st. with afterburning.

Dimensions:
Wingspan 38 feet 10 inches,
length 46 feet 1 1/2 inches,
height 15 feet 6 inches,

Performance:
Maximum speed 760 mph at sea level, 852 mph at 35,000 feet.
Initial climb rate 23,800 feet/minute.
Service ceiling 44,900 feet,
combat ceiling 51,000 feet.

Weights: 21,712 pounds empty, 39,122 pounds maximum takeoff.

Internal armament consisted of four 20-mm Pontaic M-39 cannon. Underwing loads could include up to 6000 pounds of bombs and fuel tanks on six stations.

The kit consists of over 430 parts:
Fuselage
- Detailed fuselage w/accurate design
Wing
- Optional position flaps
Engine
- Highly detailed Engines
Interior
- Finely detailed cockpit,gear cabin,
- crew seats with photo-etched seat belts and harnesses.
Tire
- Grooved rub

18 sprues and tires