Iwata Sprint Jet Airbrush Compressor # IW-SPRINT

The Iwata Sprint Jet airbrush compressor is compact and quiet producing a pre-set working pressure of 20-25 PSI.

It is an excellent choice for general purpose applications that require low to medium air pressure.

The moisture filter prevents pulsation while trapping condensation and delivering clean, dry air.

The mounted air pressure gauge displays the air pressure and if desired, the bleed valve may be used to lower the working pressure below the preset range.

The Sprint Jet has an air intake filter that protects the motor from dust and particulates and allows easy access for quick filter changes.

The Sprint Jet includes an Iwata high-strength polyurethane air hose and replacement air intake filter.

Also included are air hose adaptors for Badger, Aztek and Paasche brand airbrushes and a detailed operation manual.

The Iwata Sprint Jet features:

Low Maintenance: Oil-less single piston air compressor
Pressure Category: Low to medium
Horsepower (HP): Quiet running 1/8 HP induction motor
Air flow @ 60 Hz: 0.58 CFM (16 LPM)
Working pressure: 0 psi to 25 psi
Moisture filter: Removes the moisture and prevents pulsing
Pressure gauge: Displays the air pressure clearly
Adjustable bleed valve: Located on the bottom of the filter used to regulate the air pressure
Includes air hose: 10-foot (3m) Iwata high-strength polyurethane air hose
Outlet: 1/4 BSP
Not Automatic: Features on/off switch
Voltage Requirements: 110 – 120V 60Hz
Wattage (W): 90
Amps (A): 1
Assembled Dimensions (inches): 5.71 x 10.55 x 6.38
Assembled Dimensions (mm): 145 x 268 x 162
Weight: 4kg (7.78 Ibs)
Voltage: 220-240V 50Hz
Noise level: 56 decibels
Duty cycle: 40 Minutes continuous use. Please allow the motor to rest for at least 20 minutes after each cycle of continuous use.