GodHand Soft Metal Nipper # NKN-125

This double-edged nipper is designed specifically for soft metal wires, focusing on the diameters often used in model making.

It can cut almost flat without crushing the wire.

Since the cut surface does not get deformed, it can be inserted directly into a hole made with a drill of the same diameter as the wire.

Post-processing of the cut surface (such as filing) is kept to a minimum, improving work efficiency.

This tool is useful when you want to use metal wire for detailing or when pinning (embedding metal wire to reinforce) parts when joining them.

Cutting Capacity
・Brass wire: Φ0.5mm to Φ1.5mm
・Copper wire, aluminum wire: Φ0.5mm to 2mm
*Do not cut anything other than the target wire.
*Etching parts cannot be cut.

Product Details
Total length: Approx. 125mm
Weight: Approx. 65g
・Soft grip
-Nipper cap included
*Specifications are subject to change without notice.

Notes
- Do not cut anything other than the intended wire.
・For safety, please wear protective glasses.
- There is a risk of the object flying away, so make sure there are no people or fragile objects nearby before starting work.
- Do not touch the blade directly.
・Do not apply a load beyond the capacity of the product. Be especially careful not to apply a load to the tip.
- To prevent rust, wipe off any dirt or fingerprints and apply oil to the shaft and cutting edge.
・Store in a case out of reach of small children.
・If you touch a metal part with your fingers, wipe off your fingerprints and apply oil. Oils from your skin can cause rust, so be sure to wipe them off with a clean cloth.
- Regularly apply anti-rust and lubricating oil such as nipper maintenance oil. If the lubrication performance decreases, rattling will occur and it may cause damage.
・After use, store with the cap on.