GodHand Mini Metal Wire Nipper # SWN-100-M

Cut thin metal wires precisely in tight spaces!

The cut surface is flat, so post-processing is easy!

A small metal wire nipper that is convenient for cutting the wires of ship models and airplane models.

It is easier to handle than regular-size metal nippers, so it is easy to insert the blade into tight spaces and cut.

It is easy to cut right next to parts, and is effective for fine cutting work.

It can cut extremely thin wires such as metal line No. 0.02 (Φ0.042mm) without crushing them.

It can cut the target wire as flat as possible (flush cut), so the cut marks are not noticeable even if it is cut.

It cuts without crushing, so work efficiency is high!

Since it cuts metal wire without crushing it, you can insert the cut wire directly into a hole made with a drill of the same diameter.

Since it cuts flat, you can simply cut it where you want, it eliminates the need to file the cut surface, which increases work efficiency.

It has a special blade that performs best when used according to the thickness of the cutting object !

God Hand's unique "Hybrid Edge" is used, where the blade is sharpened differently on the tip half and the base half when viewed from the centre of the blade.

The tip half is specialized for cutting metal lines up to 0.02 (Φ0.042mm), while the base half can cut soft metal wires up to Φ0.5mm.

Product Details
Total length: Approx. 100mm
Cutting capacity
(tip side): Ultra-thin wires such as metal lines (metal rigging)
(base side): Copper wires, brass wires, metal lines (metal rigging) with diameters of 0.5 mm or less
*Stainless steel, piano wire, nickel silver wire, and spring materials are not included.
*Specifications are subject to change without notice.

⚠Notes
・Wire materials thicker than Φ0.5mm are not eligible.
- Do not cut wire with a diameter of 0.5 mm at the tip of the blade.
- Do not cut anything other than the intended wire.
・For safety, please wear protective glasses .
- There is a risk of the object flying away, so make sure there are no people or fragile objects nearby before starting work.
- Do not touch the blade directly.
・Do not apply a load beyond the capacity of the product. Be especially careful not to apply a load to the tip.
- To prevent rust, wipe off any dirt or fingerprints and apply oil to the shaft and cutting edge.
・Store in a case out of reach of small children.
・If you touch a metal part with your fingers, wipe off your fingerprints and apply oil. Oils from your skin can cause rust, so be sure to wipe them off with a clean cloth.
- Regularly apply anti-rust and lubricating oil such as nipper maintenance oil . If the lubrication performance decreases, rattling will occur and it may cause damage.
・After use, store with the cap on.