GodHand Brushwork PRO Oblique Brush S Made In Japan # GH-EBRSP-NS

GodHand make the best modelling tools in the world.

We're not just making that up -Pete, James, Festa and Foxx have sworn by them for years and we are ridiculously excited to be able to bring them to you now. They truly are tools that are at home whether they are in the hands of a beginner or a professional. These are not mass-produced throwaway tools; they are tools designed by and for master craftsmen that will enable you to create incredible art.

Brushwork PRO Oblique Brush S

Brush tip for easy painting as desired! Japanese-made high-quality synthetic fibers!

There are two types of Oblique Brushes with different brush tip thicknesses: S and M.
The [S] brush has a width of 2 mm, perfect for painting deep areas. The pointy tip helps you paint sharply right to the edge.

Brush made with our dedication to brush painting!
Brushwork PRO is a delicate paintbrush with each bristle made by a brush craftsman specializing in synthetic bristles.
Unlike ordinary synthetic fiber brushes, the bristles do not dry out and break off easily, keeping the bristles always soft and new.
Japanese-made synthetic bristles (PBT) with a firm texture

Each brush is hand-made by Japanese brush craftspersons who specialize in synthetic bristles.
Animal hair brushes tend to become damaged, torn, and dry when soaked in solvents, but Brushwork PRO’s PBT bristles are solvent-resistant and less prone to damage.
The bond that holds the brush tip in place is also solvent-resistant, ensuring a long-lasting good brush tip.
The brush tip is more flexible than general chemical fiber brushes due to the firmness adjusted for easy brush painting on models.
An assorted range of brush tip shapes for use in different painting situations.
Short brush tip has a lower water supply for the paint, causing the paint to dry quickly.
This is why Brushwork PRO has designed the brush tip length to achieve ease of painting and paint absorbency.
Thanks to the special processing PBT bristles, bent bristles become straight again with hot water at 90℃.
Exclusive aluminum cap for storage.

How to fix a brush with bristles bent out
Remove any dirt from the brush before soaking it in hot water.
*Please be careful of burns when using hot water.

1. Fill a heat-resistant container with hot water at 90℃, and soak the bent brush tips for about 10 seconds.
2. Use the sides of the container to straighten out any bent bristles.
3. Pull the brush up along the side to keep it straight.
4. Check the bottom of the brush is straight and leave it to dry.

*For some bristles with a limited lifespan in use, it may not work.
*Note that if the water gets cold during the process, it may not work.

Brushwork PRO Angular Brush S
Product Code：GH-EBRSP-NS

Quality Indication
・Dimensions: approx. 145 mm from brush tip to handle end, tip width approx. 2 mm
・Handle material: Wooden　
・Bristle: High-quality nylon (PBT)　　
・Exclusive cap included
・Applicable paints: Water-based ◎ / Oil-based ◎ / Lacquer ◎ / Urethane ○
・Made in Japan

⚠NOTE
・Please place a cap and keep out of reach of children.
・Please do not use it for any other purpose.
・Please wear protective glasses during use.
・Please do not touch the brush tip directly.
・Please read the handling instructions for the paint before using solvents.
・Please be careful of burns when using hot water.